MagicEngine
Forums
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Japanese English 

MagicEngine 1.0 PR 3!
Goto page 1, 2  Next
 
Post new topic   Reply to topic    MagicEngine Forum Index -> Bug/Problem Reports
View previous topic :: View next topic  
Author Message
dmichel
Admin
Admin


Joined: 04 Apr 2002
Posts: 1166
Location: France

PostPosted: Mon Nov 22, 2004 1:27 am    Post subject: MagicEngine 1.0 PR 3! Reply with quote

I'm uploading it right now, this version should fix the gamepad problem. Smile
_________________
David Michel
Back to top
View user's profile Send private message
BBQmyNUTZ
Visitor
Visitor


Joined: 27 Dec 2002
Posts: 8

PostPosted: Mon Nov 22, 2004 1:49 am    Post subject: Reply with quote

My USB gamepads are still not being detected with PR3.

Here's what I get in the log file created:

[GAMEPAD STATS]
gamepad 0 stats:
status: 0004
poll: failed=4525 success=0
axes (4):
- 0: min=268435456 max=-268435456 [0 (0 / 0)]
- 1: min=268435456 max=-268435456 [0 (0 / 0)]
- 2: min=268435456 max=-268435456 [0 (0 / 0)]
- 3: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
- 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (12):
- 0: off=0 on=0 bitmask=00
- 1: off=0 on=0 bitmask=00
- 2: off=0 on=0 bitmask=00
- 3: off=0 on=0 bitmask=00
- 4: off=0 on=0 bitmask=00
- 5: off=0 on=0 bitmask=00
- 6: off=0 on=0 bitmask=00
- 7: off=0 on=0 bitmask=00
- 8: off=0 on=0 bitmask=00
- 9: off=0 on=0 bitmask=00
- 10: off=0 on=0 bitmask=00
- 11: off=0 on=0 bitmask=00

[GAMEPAD STATS]
gamepad 1 stats:
status: 0004
poll: failed=4525 success=0
axes (4):
- 0: min=268435456 max=-268435456 [0 (0 / 0)]
- 1: min=268435456 max=-268435456 [0 (0 / 0)]
- 2: min=268435456 max=-268435456 [0 (0 / 0)]
- 3: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
- 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (12):
- 0: off=0 on=0 bitmask=00
- 1: off=0 on=0 bitmask=00
- 2: off=0 on=0 bitmask=00
- 3: off=0 on=0 bitmask=00
- 4: off=0 on=0 bitmask=00
- 5: off=0 on=0 bitmask=00
- 6: off=0 on=0 bitmask=00
- 7: off=0 on=0 bitmask=00
- 8: off=0 on=0 bitmask=00
- 9: off=0 on=0 bitmask=00
- 10: off=0 on=0 bitmask=00
- 11: off=0 on=0 bitmask=00
Back to top
View user's profile Send private message
reddice
Member
Member


Joined: 19 Nov 2004
Posts: 24
Location: Brooklyn, NY

PostPosted: Mon Nov 22, 2004 1:51 am    Post subject: Reply with quote

Come on this is getting rediculous. Is it so hard to get the stinking usb gamepad pro gamepad to work with this thing. I purchased the program yesterday but it will be a waste if I can't use my gamepad.
Back to top
View user's profile Send private message Visit poster's website
Tomasz
Regular
Regular


Joined: 29 Oct 2003
Posts: 89

PostPosted: Mon Nov 22, 2004 1:51 am    Post subject: Reply with quote

Still doesn't work here either Sad

Code:
[GAMEPAD STATS]
gamepad 0 stats:
status: 0004
poll: failed=7530 success=0
axes (3):
  - 0: min=268435456 max=-268435456 [0 (0 / 0)]
  - 1: min=268435456 max=-268435456 [0 (0 / 0)]
  - 2: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
  - 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (13):
  - 0: off=0 on=0 bitmask=00
  - 1: off=0 on=0 bitmask=00
  - 2: off=0 on=0 bitmask=00
  - 3: off=0 on=0 bitmask=00
  - 4: off=0 on=0 bitmask=00
  - 5: off=0 on=0 bitmask=00
  - 6: off=0 on=0 bitmask=00
  - 7: off=0 on=0 bitmask=00
  - 8: off=0 on=0 bitmask=00
  - 9: off=0 on=0 bitmask=00
  - 10: off=0 on=0 bitmask=00
  - 11: off=0 on=0 bitmask=00
  - 12: off=0 on=0 bitmask=00

[GAMEPAD STATS]
gamepad 1 stats:
status: 0004
poll: failed=7530 success=0
axes (3):
  - 0: min=268435456 max=-268435456 [0 (0 / 0)]
  - 1: min=268435456 max=-268435456 [0 (0 / 0)]
  - 2: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
  - 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (13):
  - 0: off=0 on=0 bitmask=00
  - 1: off=0 on=0 bitmask=00
  - 2: off=0 on=0 bitmask=00
  - 3: off=0 on=0 bitmask=00
  - 4: off=0 on=0 bitmask=00
  - 5: off=0 on=0 bitmask=00
  - 6: off=0 on=0 bitmask=00
  - 7: off=0 on=0 bitmask=00
  - 8: off=0 on=0 bitmask=00
  - 9: off=0 on=0 bitmask=00
  - 10: off=0 on=0 bitmask=00
  - 11: off=0 on=0 bitmask=00
  - 12: off=0 on=0 bitmask=00
Back to top
View user's profile Send private message
reddice
Member
Member


Joined: 19 Nov 2004
Posts: 24
Location: Brooklyn, NY

PostPosted: Mon Nov 22, 2004 1:55 am    Post subject: Reply with quote

[INPUT INIT]
opening direct input DLL... OK
init direct input... OK
scanning gamepad device(s)...
- gamepad 0 : GamePad Pro USB (buttons=10, axes=2, povs=0)
found 1 gamepad(s)

[GAMEPAD STATS]
gamepad 0 stats:
status: 0004
poll: failed=5157 success=0
axes (2):
- 0: min=268435456 max=-268435456 [0 (0 / 0)]
- 1: min=268435456 max=-268435456 [0 (0 / 0)]
povs (0):
buttons (10):
- 0: off=0 on=0 bitmask=00
- 1: off=0 on=0 bitmask=00
- 2: off=0 on=0 bitmask=00
- 3: off=0 on=0 bitmask=00
- 4: off=0 on=0 bitmask=00
- 5: off=0 on=0 bitmask=00
- 6: off=0 on=0 bitmask=00
- 7: off=0 on=0 bitmask=00
- 8: off=0 on=0 bitmask=00
- 9: off=0 on=0 bitmask=00
_________________________

It says it found the gamepad but then at the end of the log it says it fails and refuses to work with any game.
Back to top
View user's profile Send private message Visit poster's website
dmichel
Admin
Admin


Joined: 04 Apr 2002
Posts: 1166
Location: France

PostPosted: Mon Nov 22, 2004 1:58 am    Post subject: Reply with quote

This is getting weird, the log show that there's always the same problem... Think

ok ok I will try something else.
_________________
David Michel
Back to top
View user's profile Send private message
reddice
Member
Member


Joined: 19 Nov 2004
Posts: 24
Location: Brooklyn, NY

PostPosted: Mon Nov 22, 2004 2:01 am    Post subject: Reply with quote

Why don't you do what other emulators do and use Directimput. I think the problem is that depending on what gamepad you are using it is detecting that. The program shows my gamepad, instead their should be a option for general gamepad. That might work.
Back to top
View user's profile Send private message Visit poster's website
generalleoff
Member
Member


Joined: 19 Nov 2004
Posts: 23

PostPosted: Mon Nov 22, 2004 2:06 am    Post subject: Reply with quote

Same problems. No responce in GUI or game input.
Back to top
View user's profile Send private message
dmichel
Admin
Admin


Joined: 04 Apr 2002
Posts: 1166
Location: France

PostPosted: Mon Nov 22, 2004 2:08 am    Post subject: Reply with quote

I do use DirectInput but it fails to read the gamepad state, I must do something wrong but it's hard to guess what, everything works ok here.
_________________
David Michel
Back to top
View user's profile Send private message
reddice
Member
Member


Joined: 19 Nov 2004
Posts: 24
Location: Brooklyn, NY

PostPosted: Mon Nov 22, 2004 2:26 am    Post subject: Reply with quote

I read some other posts and tryed JoyToKey and I am able to use my gamepad using that program until the problem is fixed. Now only if I will receive my key. Still did not get it.
Back to top
View user's profile Send private message Visit poster's website
Jim Z
Visitor
Visitor


Joined: 22 Nov 2004
Posts: 7

PostPosted: Mon Nov 22, 2004 2:43 am    Post subject: Reply with quote

Same problem here. relevant bits of the log:

Code:
INPUT INIT]
opening direct input DLL... OK
init direct input... OK
scanning gamepad device(s)...
  - gamepad  0 : SideWinder Game Pad USB version 1.0 (buttons=10, axes=2, povs=0)
found 1 gamepad(s)


...

Code:
[GAMEPAD STATS]
gamepad 0 stats:
status: 0004
poll: failed=13109 success=0
axes (2):
  - 0: min=268435456 max=-268435456 [0 (0 / 0)]
  - 1: min=268435456 max=-268435456 [0 (0 / 0)]
povs (0):
buttons (10):
  - 0: off=0 on=0 bitmask=00
  - 1: off=0 on=0 bitmask=00
  - 2: off=0 on=0 bitmask=00
  - 3: off=0 on=0 bitmask=00
  - 4: off=0 on=0 bitmask=00
  - 5: off=0 on=0 bitmask=00
  - 6: off=0 on=0 bitmask=00
  - 7: off=0 on=0 bitmask=00
  - 8: off=0 on=0 bitmask=00
  - 9: off=0 on=0 bitmask=00
Back to top
View user's profile Send private message
denzilla
Regular
Regular


Joined: 03 Jan 2003
Posts: 141

PostPosted: Mon Nov 22, 2004 2:59 am    Post subject: Reply with quote

My logfile looks like everyone elses. This is like a giant tease having 1.0 but not being able to really do anything with it. Is there no way to replace this new code with the old working gamepad code? Even if this new code starts working the setup is very confusing. I wish you could just fire up the control config and it would ask me to press what button I want to be select, start, etc.

David, you're prolly gonna have to get a USB controller to test with to see what we're talking about.


Last edited by denzilla on Mon Nov 22, 2004 3:31 am; edited 1 time in total
Back to top
View user's profile Send private message
Rockman
Regular
Regular


Joined: 23 Jun 2004
Posts: 155

PostPosted: Mon Nov 22, 2004 3:29 am    Post subject: Reply with quote

I have 2 RadioShack Playstation to USB adapters (cat. 26-304). ME1.0 pr3 recognizes it but doesn't read the buttons (Same as everyone else).

[INPUT INIT]
opening direct input DLL... OK
init direct input... OK
scanning gamepad device(s)...
- gamepad 0 : USB Dual Vibration Joystick (buttons=12, axes=4, povs=1)
- gamepad 1 : USB Dual Vibration Joystick (buttons=12, axes=4, povs=1)
found 2 gamepad(s)

[GAMEPAD STATS]
gamepad 0 stats:
status: 0004
poll: failed=10957 success=0
axes (4):
- 0: min=268435456 max=-268435456 [0 (0 / 0)]
- 1: min=268435456 max=-268435456 [0 (0 / 0)]
- 2: min=268435456 max=-268435456 [0 (0 / 0)]
- 3: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
- 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (12):
- 0: off=0 on=0 bitmask=00
- 1: off=0 on=0 bitmask=00
- 2: off=0 on=0 bitmask=00
- 3: off=0 on=0 bitmask=00
- 4: off=0 on=0 bitmask=00
- 5: off=0 on=0 bitmask=00
- 6: off=0 on=0 bitmask=00
- 7: off=0 on=0 bitmask=00
- 8: off=0 on=0 bitmask=00
- 9: off=0 on=0 bitmask=00
- 10: off=0 on=0 bitmask=00
- 11: off=0 on=0 bitmask=00

[GAMEPAD STATS]
gamepad 1 stats:
status: 0004
poll: failed=10957 success=0
axes (4):
- 0: min=268435456 max=-268435456 [0 (0 / 0)]
- 1: min=268435456 max=-268435456 [0 (0 / 0)]
- 2: min=268435456 max=-268435456 [0 (0 / 0)]
- 3: min=268435456 max=-268435456 [0 (0 / 0)]
povs (1):
- 0: min=268435456 max=-268435456 [0 (0 / 0 / 0 / 0)]
buttons (12):
- 0: off=0 on=0 bitmask=00
- 1: off=0 on=0 bitmask=00
- 2: off=0 on=0 bitmask=00
- 3: off=0 on=0 bitmask=00
- 4: off=0 on=0 bitmask=00
- 5: off=0 on=0 bitmask=00
- 6: off=0 on=0 bitmask=00
- 7: off=0 on=0 bitmask=00
- 8: off=0 on=0 bitmask=00
- 9: off=0 on=0 bitmask=00
- 10: off=0 on=0 bitmask=00
- 11: off=0 on=0 bitmask=00
Back to top
View user's profile Send private message
The Coop
Visitor
Visitor


Joined: 19 Nov 2004
Posts: 15
Location: Outskirts of B.F.E.

PostPosted: Mon Nov 22, 2004 4:21 am    Post subject: Reply with quote

Might be a new problem with reading the CD tracks. I know of one game having the problem so far (Drac X), but I don't have any other TG-16 CDs to test out. Here's a link to post I made, which I wrote in another thread before I saw this PR3 thread was made...


http://www.magicenginefx.com/forums/viewtopic.php?t=878&start=0&postdays=0&postorder=asc&highlight=
Back to top
View user's profile Send private message Visit poster's website
drcaslas
Visitor
Visitor


Joined: 20 Nov 2004
Posts: 16

PostPosted: Mon Nov 22, 2004 5:19 am    Post subject: Reply with quote

I have to agree with the post above that the old controlle config screen was easier to use - just click on the pad then hit the right button. This also allowed buttons to be used for up/down/left/right which my pad requires (and the new GUI won't allow you to map to anything but an axis). Can we get up/down/left/right on the same selection as the buttons?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MagicEngine Forum Index -> Bug/Problem Reports All times are GMT + 1 Hour
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group